system uses inlet feeder to reach into the materials while it is rotating,
collecting and transporting materials to vertical screw conveyor by negative
rotation. Vertical screw conveyor lifts materials to horizontal conveyor
through clockwise rotation. Materials are then transferred to rotating tower
and are conveyed to the follow-up conveying system by vertical chute.
Unloading capacity can be: 100t/h，200t/h，300t/h，400t/h，500t/h,
The LXS250 type
designed by Yuntian is a fixed ship unloader with a two-section arm. Designed
capacity is 250 t/h(Based on the volume-weight of cement of 1.30 t/m^3). Materials
are discharged from the ship through vertical screw and inlet feeder and transported
to follow-up equipment by horizontal screw. Applicable ship size is 3000～5000 DWT.
Power consumption is about 0.5 Kwh/t.
LXJ300 series is a continuous screw ship unloader with three sections
of arms. It is composed of vertical and horizontal conveying screws. This
series of ship unloaders are able to unload barges with size under 5,000DWT.
The applicable materials are powdery and granular materials.
unloaders installed on trailers are required to begin operation in 30 minutes
starting from transportation position. The discharge head of ship unloader can
be connected to any conveying systems or equipment. Trailer-mounted ship
unloader developed by Yuntian meets the requirements of unloading vessels below
5,000 DWT (optimum match), the rated capacity varies from 100t/h to 300t/h.
rail type screw ship unloader designed by our company is suitable for unloading
bulk barges of big tonnage at ports. Conveying arms of this series of ship
unloaders can luff and swing freely within a wide range and can realize
continuous material suction during rotation. Its operation is flexible,
convenient and highly efficient. There is a dust collector at the blanking end.
A follow-up of sealed belt conveying system is used to ensure a sealed, dust
free and continuous conveying following the movement of ship unloader.
The G-LD1200 continuous ship
unloader is a high-performance bulk material unloader. It can mainly handle
material like coal, clinker, ore, petroleum coke, etc. from a ship on the sea, transported
via belt conveyor to the silo. It is suitable for unloading ship of 10000 ~
The capacity of bagged ship
loader exported to Indonesia and Vietnam is 120 T/H, rail mobile type, suitable
for loading ship of 5000 DWT, and handling bagged material of grain, feed,
chemical, fertilizer and metallurgy as well.
The ship loader developed by Yuntian Machinery can load the bagged material and bulk material, to meet the needs of different customers.
All ship loaders are equipped with dust collector. It`s almost no dust when in operation, with obvious environmental advantages.
The capacity of the ship loader can range from 300 t/h, 500 t/h, 800 t/h, 1000t/h and 1500 t/h. It is suitable for handling cement, clinker, coal, ore, grain, fertilizer etc.
The fixed screw ship unloader used
in Xiangshan conch cement company, with the capacity of 150 T/H, can unload fly
ash for 2000 DWT ship, directly loading to the truck, which is economical,
practical, energy efficient, and environmental friendly.